Main meters
Utility boundary or after the incoming breaker.
Energy products
Energy-monitoring equipment
This field is metering hardware — not a saving promise. The BMS only shows a true kWh when the meter, current transformer and protocol match the live controller.
What we list
- Main meter — utility boundary or after the incoming breaker
- Branch meters — cooling, pumps, lighting, sockets
- Current transformers: the ratio on the label must match the schedule
- Protocol gateways when the meter and the BMS do not share a standard
What to send
- Where you measure: main or branch
- Whether the controller reads Modbus on twisted pair or on Ethernet
- CT ratio if already installed
Lines we put on the schedule
Branch meters
Cooling, pumps, lighting, sockets — split so systems can be compared.
Current transformers
Label ratio matches the meter setting; never leave the secondary open.
Meter gateways
When the meter and the BMS do not share a standard. Include the map.